TECH foam plastic horizontal burning tester is in accordance with the national standard GB / T8332-2008 : Determining the combustion properties of the foam plastic by horizontal combustion test method. For the determination of density of less than 250kg / mÂ³ foam small sample combustion performance levels in a small flame. The PLC and touch screen can realize the intelligent measuring and provide the convenience and simple procedure for the experimenter.
It Applies to assessment of the combustion performance about the burning rate ,fire out time, firing range and quality loss.
Model:Ftech- ISO 9772
consists the test section and control components for easy field installation and commissioning.
2. The large observation window is easy to observe the sample combustion state;
3. Advanced industrial appearance and control designing, easy to touch the specimen and burner;
4. Controlling the movement of the burner after closing the door.
5. Bunsen burner is in according with ISO10093: 1998 .
Shaft length : 100 Â± 10mm,
Inner diameter : 9.5 Â± 0.3mm.
The height of of flame :38 Â± 2mm
6. The programmable controller PLC + touch screen for control / testing / computing / data display.
(1) High-voltage automatic ignition
(2) The digital pressure gauge and the touch screen displays the gas pressure and flow.
(3) Burning time is automatically stored and reflected in the test report.
(4) The test time and flame time can be set from the touch screen.
(5) The liquid crystal screen accurately displays the temperature
7. Equipped with smoke hole and exhaust fan .
8. Import pressure gauge and pressure regulator.
9. Imported gas mass flow meter and needle valve can accurately control the gas flow.
10. The automatic time record can reserve the test time;
11. The volume of tank is more than 0.5mÂ³;
Relative humidity: Ã¢â°Â¤75%;
Air purity: Ã¢â°Â¥95% natural gas, propane;