Ignition Temperature Tester

Product Description

• The inner diameter of furnace tube is 100mm ± 5mm, the length is 230mm ± 20mm,made of a ceramic that will withstand at least 750
• The inner tube diameter is 75 mm ±2 mm, length is 240 mm ± 20 mm, temperature resistance is not less than 750
• Size of stainless steel container: inner diameter 9mm, height 48mm.
•  Inside diameter of pilot ignitor:1.8mm±0.3mm .
•  Copper ingot furnace can be constant at any temperature between 150-450
• Equipped with mass flow controller to control the intake air flow and ensure the air flow rate.
• Control of propane intake pressure with pressure gauge and relief valve.
• The PLC system controls the automatic rise and fall of the sample and the furnace cover assembly to facilitate the installation of the sample.
• Configuration of computer and Labview control software.
• Settable furnace temperature.
• During the test, the furnace temperature, the inner tube temperature and the surface temperature of the sample can be monitored and recorded, and the temperature curve can be displayed.
• Insulation, consisting of a layer of mineral fiber, approximately 60 mm thick, and covered by a metal jacket.
• Three imported thermocouples and thermometers to detect temperature in furnace and sample temperature.
• Sample container is made of stainless steel.
• The accuracy of timer is 0.1s.
• Automatic heating up program;
• Ambient temperature: room temperature to 40
• Environmental humidity: 75%
• Precision of temperature control: +2 can be adjusted between 150 and 450
• Display accuracy:±0.5 C.
• Test furnace dimension: 400*400*500mm.
• Weight:30 Kg