Needle Flame Test Machine

Product Description

Products

 is in accordance with national standards GB4706.1-1998 to design and produce .The tester applies for lighting, low-voltage electrical equipment, household appliances, electrical machines, motors, power tools, electronic equipment, electrical instruments, electrical connectors, accessories and other electrical and electronic equipment and parts, component research, production and quality control departments and insulating materials , plastic or other solid combustible materials industry to carry on  small-flaming ignition experiments.

Needle flame tester uses standard size (Φ0.9mm) needle burner .and burns the sample with specific gas (butane) at the angle of 45 °.we determine the ignition risk of  the small-flame caused by fault conditions in the equipment by testing the sample burning situation ,burning time and burning  length

Model:ech - IEC60695

Standard:

Technical Parameters:

:the hole dia. 0.5mm ± 0.1mm, diameter≤0.9mm, length≥35mm2. Burner flame angle:0- 45 ° (arbitrary adjustment)

3. The combustion gases: 95% butane gas or propane gas;

4.Subplate: white pine plank ( 10mm),

   Surface covered by   standard silk paper

   200mm ± 5mm below the flame

5. Temperature range: 0--1000 â„ƒ

6. The flame temperature requirements:  100 ± 2 â„ƒ ~ 700 â„ƒ ± 3 â„ƒ,

  23.5 ± 1.0s;

7. The flame height: 12mm ± 1mm;

8. Ignition time: 0s ~ 999.9s adjustable, generally  30s;

9.  Burning time: 0s ~ 999.9s, automatic recording, manual pause;

10. Test Space: ≥0.5m3, black background, (can be customized cubic 0.75 m3 or 1 m3 according to customer requirements);

11. Temperature sensor: K-type insulation-sheathed thermocouple (Φ0.5mm)

12. Automatic test program , independent exhausting system;

13. Dimensions: L1120 * W520 * H1250mm,

       The diameter of exhaust :Φ100mm;

14. Test power supply: 220V / AC, 50Hz