
Model:FTech-EN136E
Introduction:
is mainly composed of jacket and bib composition, may also wear fire protective helmets, fire protective boots and fire-protective gloves!
Each set must be fitted a serial number of check marks with strong national fire equipment quality inspection center is to be manufactured.
Standards:Features
2, Inlet flow control valve, precise control of the gas flow; precise control of the flame height 40mm ± 2mm;
3, Imported brands gauge and a pressure regulating valve;
4, Imported needle valve to control the burner gas flow rate;
5,PLC and touch screen control systems; test interface is easy to operate;
6, The system automatically timing, the thermal data is automatically recorded and stored;
7, Various test reports independent storage and freedom retrieval;
8, Computer control system, automatic timing, the heat data is automatically recorded and stored;
• Metal head mould, heat-resistant, corrosion-resistant;
• The distance between radiation source and the metal mould is 175mm, the HRR at this location is 7.0~9.0 kW / m2;
• US imports of heat meter to accurately detect the radiant heat;
• Temperature controller controls the heat release rate of the heat radiating device (resolution: 0.1kW / m2)
• Radiation clapboard free for extraction and placement.
• Head-mould moving is base on the slide design,
• Breathing apparatus: artificial respiration can be carried out during the testing process; artificial breathing device work 10-30 times per minute, each circle 1.0~2.5L,
• PLC automatic control device,
Optional: Ventilator
Specification:
Size: 1,400 (W) × 600 (D) × 1,400 (H) mm
Power: AC 220V, 50 / 60Hz, 30A
Weight: 80kg